2010 Inshore 16 by ECC w/ Yamaha 40 4s

Hobie-Wan-Kenobi · 02-27-2010, 09:04 PM

****SOLD****

For Sale as of 4/8 with new pics below:

2010 Inshore 16 by Inshore Power Boats - technical poling skiff / flats boat perfect for the Mosquito Lagoon or lakes and rivers. I fish on it every weekend, there is nothing wrong with this boat. Reason I am selling is I'm upgrading to a larger boat with a bigger engine but this boat can go up to 32 mph and sips gas. It is the easiest boat to pole I have ever been on. Catches a lot of fish and dead quiet on the water. Can launch this boat where I launch my kayaks it is so light, just drop it past the hubs and it slides off the bunks with ease.

NOTE: 5 year transferable hull warranty, 3 year engine warranty until 9/22/2012!

Specs:
Fiberglass Composite - No Wood!
Length: 16'
Beam: 6'
Engine: Yamaha 40 EFI
Prop: Powertech Stainless
Draft: 6-7" loaded
Max Capacity: 4 persons
Weight: Super light, less than 1,000 lbs, easy to trailer, easy to launch

Features:
- Custom Built to order 6 mo ago, built by East Cape Canoes/Inshore Power Boats in Orlando
- New engine, 65 hrs, has not even had it's first service! I have oil for engine and gear oil w/ pump for buyer when it's time for oil change.

- Fully molded inside/out - no chopper gun finish
- Custom two-tone, Carolina Blue/Matterhorn White
- Shark eye Navigation Lights
- Rear Deck on Hinge
- Yamaha 40 4-stroke fuel-injected - No Carbs!
- Stainless PowerTech High Thrust Propeller
- 2 fuel/water separators, no ethanol issues!
- Custom Casting Platform
- Custom Poling Platform
- Removable Minn-Kota 12v 55# thrust trolling motor with handle extension & deep cycle battery with breaker & includes new spare prop
- Custom Side Console with Stainless Steering Wheel & Yamaha multi-tach gauge
- Removable 6 gallon gas tank with quick disconnects & includes 2nd 6 gal tank
- Pop-up Stainless Cleat
- Carbon fiber Wang Anchor system w/ rod holder
- Lenco Trim Tabs
- Custom Continental Aluminum Trailer with Stainless hardware, LED lights, carpeted side bunks, torsion axle suspension
- Mag wheels on trailer with new tires
- Spare with hub and mag rim
- Fold away trailer tongue
- flip up jack stand
- Carbon Marine carbon fiber push pole

Price is $13,000 obo. This boat costs $18,000 as it is setup, but accepting offers.

Call Eddie at 321.356.9139

Hobie-Wan-Kenobi · 03-03-2010, 01:08 PM

bump... in Islamorada til tomorrow if anyone wants to see it
321.356.9139

Hobie-Wan-Kenobi · 03-15-2010, 07:55 AM

back in O-town

phlatsphil · 03-23-2010, 08:40 AM

Beautiful boat!! She should be on the water, hope she sells quickly.

Hobie-Wan-Kenobi · 03-23-2010, 01:57 PM

Thanks! She's on the water about 1-2x per week, so somebody buy it soon, I keep racking up hours, the boat catches fish what can I say?! If you're in Mosquito Lagoon or NIRL on the weekends hit me up, I may be on the water for a wet-test.

Eddie
321.356.9139

Did I mention it has full hull warranty as well as 3 years engine warranty? Hasn't even had it's first service!

Hobie-Wan-Kenobi · 04-08-2010, 07:48 AM

new pics on top of thread

02-27-2010, 09:04 PM	#1 (permalink)
Hobie-Wan-Kenobi Member Join Date: Dec 2009 Location: Orlando Posts: 35	2010 Inshore 16 by ECC w/ Yamaha 40 4s **SOLD** For Sale as of 4/8 with new pics below: 2010 Inshore 16 by Inshore Power Boats - technical poling skiff / flats boat perfect for the Mosquito Lagoon or lakes and rivers. I fish on it every weekend, there is nothing wrong with this boat. Reason I am selling is I'm upgrading to a larger boat with a bigger engine but this boat can go up to 32 mph and sips gas. It is the easiest boat to pole I have ever been on. Catches a lot of fish and dead quiet on the water. Can launch this boat where I launch my kayaks it is so light, just drop it past the hubs and it slides off the bunks with ease. NOTE: 5 year transferable hull warranty, 3 year engine warranty until 9/22/2012! Specs: Fiberglass Composite - No Wood! Length: 16' Beam: 6' Engine: Yamaha 40 EFI Prop: Powertech Stainless Draft: 6-7" loaded Max Capacity: 4 persons Weight: Super light, less than 1,000 lbs, easy to trailer, easy to launch Features: - Custom Built to order 6 mo ago, built by East Cape Canoes/Inshore Power Boats in Orlando - New engine, 65 hrs, has not even had it's first service! I have oil for engine and gear oil w/ pump for buyer when it's time for oil change. - Fully molded inside/out - no chopper gun finish - Custom two-tone, Carolina Blue/Matterhorn White - Shark eye Navigation Lights - Rear Deck on Hinge - Yamaha 40 4-stroke fuel-injected - No Carbs! - Stainless PowerTech High Thrust Propeller - 2 fuel/water separators, no ethanol issues! - Custom Casting Platform - Custom Poling Platform - Removable Minn-Kota 12v 55# thrust trolling motor with handle extension & deep cycle battery with breaker & includes new spare prop - Custom Side Console with Stainless Steering Wheel & Yamaha multi-tach gauge - Removable 6 gallon gas tank with quick disconnects & includes 2nd 6 gal tank - Pop-up Stainless Cleat - Carbon fiber Wang Anchor system w/ rod holder - Lenco Trim Tabs - Custom Continental Aluminum Trailer with Stainless hardware, LED lights, carpeted side bunks, torsion axle suspension - Mag wheels on trailer with new tires - Spare with hub and mag rim - Fold away trailer tongue - flip up jack stand - Carbon Marine carbon fiber push pole Price is $13,000 obo. This boat costs $18,000 as it is setup, but accepting offers. Call Eddie at 321.356.9139 __________________ Eddie Hobie Revo Beavertail Vengeance Last edited by Hobie-Wan-Kenobi; 04-12-2010 at 01:05 PM. Reason: added new pics

03-03-2010, 01:08 PM	#2 (permalink)
Hobie-Wan-Kenobi Member Join Date: Dec 2009 Location: Orlando Posts: 35	bump... in Islamorada til tomorrow if anyone wants to see it 321.356.9139 __________________ Eddie Hobie Revo Beavertail Vengeance

03-15-2010, 07:55 AM	#3 (permalink)
Hobie-Wan-Kenobi Member Join Date: Dec 2009 Location: Orlando Posts: 35	back in O-town __________________ Eddie Hobie Revo Beavertail Vengeance

03-23-2010, 08:40 AM	#4 (permalink)
phlatsphil Senior Member Join Date: Sep 2007 Location: Edgewater, FL Posts: 385	Beautiful boat!! She should be on the water, hope she sells quickly. __________________ 2008 Gordon Waterman 16, 50hp Tohatsu TLDI Tiller

03-23-2010, 01:57 PM	#5 (permalink)
Hobie-Wan-Kenobi Member Join Date: Dec 2009 Location: Orlando Posts: 35	Thanks! She's on the water about 1-2x per week, so somebody buy it soon, I keep racking up hours, the boat catches fish what can I say?! If you're in Mosquito Lagoon or NIRL on the weekends hit me up, I may be on the water for a wet-test. Eddie 321.356.9139 Did I mention it has full hull warranty as well as 3 years engine warranty? Hasn't even had it's first service! __________________ Eddie Hobie Revo Beavertail Vengeance Last edited by Hobie-Wan-Kenobi; 04-08-2010 at 07:25 AM.

04-08-2010, 07:48 AM	#6 (permalink)
Hobie-Wan-Kenobi Member Join Date: Dec 2009 Location: Orlando Posts: 35	new pics on top of thread __________________ Eddie Hobie Revo Beavertail Vengeance

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode